In this work, an investigation of soot-in-oil samples drawn from the oil sump of a gasoline direct injection (GDI) engine was carried out. Soot particulate was characterised in terms of size, distribution and shape of the agglomerates, and internal structure of the primary particles. The test engine was a 1.6 l modern light-duty EURO IV engine operated at speed between 1600 and 3700 rev/min, and torque between 30 and 120 Nm. After a double oil-flushing procedure the engine was operated for 30 h. Oil samples were drawn from the sump and prepared for Transmission Electron Microscopy (TEM) and High resolution TEM analysis (HRTEM) by a combination of solvent extraction, centrifugation and diethyl ether bathing. Soot agglomerates were measured in terms of their skeleton length and width, and fractal dimension. The mean skeleton length and width were 153 nm and 59 nm respectively. The fractal dimension was calculated using an iterative method and the mean value was found to be 1.44. The primary particles were found to be spherical in shape with some irregularities and presented an average diameter of 36 nm with a mode of 32 nm and standard deviation of 13 nm. The majority of particles showed an inner core and outer shell similar to diesel soot, although an amorphous layer was also clearly visible.
La Rocca, ABonatesta, FMay, MCampanella, F
Faculty of Technology, Design and Environment\Department of Mechanical Engineering and Mathematical Sciences
Year of publication: 2015Date of RADAR deposit: 2016-09-15